GideonTech.com Forums

  • September 23, 2019, 08:23:04 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Pages: [1]   Go Down

Author Topic: My Logitech 5450 are dead..But I want to bring them back to life  (Read 7841 times)

Macross2b5

  • Senior Modder
  • ***
  • Karma: +0/-0
  • Offline Offline
  • Posts: 274
My Logitech 5450 are dead..But I want to bring them back to life
« on: September 26, 2007, 01:40:17 PM »

OK here the deal I have a working set of 5450's by logitech. Now my rear wireless speakers went and died on me. So under the RMA Logitech will send me a brand new set of 5500. Well to get the new set all I had to do was send back the remote and controll unit from the 5450. Which leaves me with a subwoofer, center channel,left and right channel, and the dead wireless rears. I wanted to know if any one know that pin config on the back of the subwoofer. You know the db9 like connector. So that I can wire the subwoofer up to my hometheater cause its a better woofer then the one I have know. Thanks all
Logged
Modding, Is it safe? Sure, thats what we have the armor for....

bliq

  • Elite Modder
  • ****
  • Karma: +6/-6
  • Offline Offline
  • Posts: 1,901
Re: My Logitech 5450 are dead..But I want to bring them back to life
« Reply #1 on: September 26, 2007, 02:25:12 PM »

That's actually DB15 like a VGA connector.
Logged

urgannagru

  • Elite Modder
  • ****
  • Karma: +14/-8
  • Offline Offline
  • Posts: 4,260
Re: My Logitech 5450 are dead..But I want to bring them back to life
« Reply #2 on: September 26, 2007, 05:46:22 PM »

Might I recommend looking inside of the unit and seeing which wires go where from the connector (if its easily disassembled)?
Logged
Pages: [1]   Go Up
 

Page created in 2.057 seconds with 20 queries.