GideonTech.com Forums

  • December 09, 2019, 10:22:50 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Pages: [1]   Go Down

Author Topic: PSU question...  (Read 1092 times)

Off-The-Chart

  • Case Mod Weenie
  • *
  • Karma: +0/-0
  • Offline Offline
  • Posts: 8
PSU question...
« on: November 23, 2004, 09:10:28 AM »

This has probably been posted a lot but I can't seem to find which one works better and which one is correct.. It has to do with dual PSU setup... Some places say you should put the black and blue from 1 PSU to yellow and black on other PSU... Some say it's green and black from 1 to green and black from 2... Which one is it?
Logged

To-mod-or-not-to-mod

  • Guest
Re: PSU question...
« Reply #1 on: December 04, 2004, 03:47:06 PM »

Quote from: Off-The-Chart
This has probably been posted a lot but I can't seem to find which one works better and which one is correct.. It has to do with dual PSU setup... Some places say you should put the black and blue from 1 PSU to yellow and black on other PSU... Some say it's green and black from 1 to green and black from 2... Which one is it?


Different colours on different PSUs, its the location of the wire.  So without  getting to technical here is the link that gies the location...

Guide

I beleive this should give you all the required information.
Logged
Pages: [1]   Go Up
 

Page created in 0.054 seconds with 19 queries.