Topic: 1/2 or 3/8 (Read 1678 times)

TxTiger04 · « **on:** January 21, 2003, 04:49:00 PM »

what are some pros and cons of each size tubbing for watercooling??

GideonX · « **Reply #1 on:** January 21, 2003, 05:55:42 PM »

bigger means more water running through it.

Return_of_the_Pyro · « **Reply #2 on:** January 22, 2003, 04:18:05 AM »

so why would you use smaller?

Daneel · « **Reply #3 on:** January 22, 2003, 06:55:57 AM »

faster waterflow

Gremlin484 · « **Reply #4 on:** January 22, 2003, 12:29:50 PM »

If your resivour is rather small, i'd use 3/8... if it's bigger, go with 1/2... the more water you have within the system, the more you have to dissapate the heat with. Also, make sure your pump can handle 1/2. anything with about 250 GPH or better should work fine. I use 1/2 and it works wonderfully.

TxTiger04 · « **Reply #5 on:** January 22, 2003, 11:39:48 PM »

thanks guys...think ill go with 1/2

RentonLovesJunks · « **Reply #6 on:** January 22, 2003, 11:47:45 PM »

i read an article somewhere. basicly said that if you already have a 3/8 system, the performance increase isnt worth an upgrade. but if your building a new one, go with the ½. so there you go. have fun and good luck.

GideonTech.com Forums

News:

Author Topic: 1/2 or 3/8 (Read 1678 times)

TxTiger04

1/2 or 3/8

GideonX

1/2 or 3/8

Return_of_the_Pyro

1/2 or 3/8

Daneel

1/2 or 3/8

Gremlin484

1/2 or 3/8

TxTiger04

1/2 or 3/8

RentonLovesJunks

1/2 or 3/8