Here is another mod that I had started for a buyer who has not been reachable for a while. I may finish it someday. When i have the $$$ and free time. Till then she sits collecting dust and scrathes. I started with a Foxconn case. cheap lil $30 or so case. less by now.
Required 3/4 view Wanted large open windows, was/am going to have a spider web etched into the plexi on both top and bottom. From there I am going to add a "paint' that leaves a releif when used. i'm sure y'all remember the stuff used back in the 80s to draw on your shoes and jeans, it leaves like a plastic bead when it dries. i'm going to use black to continue the web from the etch around the rest of the case.
The two holes in the middle that face up are going to be the power light and HD activity light. i moved them from below the buttons. they will be bloo of course.
This is the non-component side of the case. i cut the spider out with a dremal and jig saw and nibbler tool. Will have frosted plexit with bloo ccl or leds to light it.
Opened up the rear exhaust fan hole.
And the "marvel Authentic" Spidey grill cover for the front.
